Bottling

This bottling equipment uses a very simple system with not a lot to go wrong. We have personally used the 4 spout version of this filler for the last 7 years and have bottled thousands of bottles of Wine and Cider.

We have used the following bottles 500ml, 330ml and 250ml beer bottles, 750ml wine and champagne bottles, 1 litre gallons, 2 litre gallons and also 4 litre plastic containers.

To adjust the fill height in the bottle you simply adjust the float valve in the holding tank. The inlet hose connector is a tapered barb which can accept a hose of 3/4″ – 1″. Manufactured in stainless steel AISI 304.

This Enoitalia gravity filler is completely made in stainless steel AISI 304, suitable for filling alimentary liquid  such as WINE, BEER, OIL, ALCOL. It is equipped with heads fully adjustable and removable for fast and thorough cleaning. On the demand the filling heads are available for bottle opening diameter 60mm, and height level 120mm. The machine is available in both desk version bench with 4 adjustable feet, either in trolley version with four wheels to make bottling easier.

Level sensor available in mechanical version, made entirely in stainless steel, both in the electronic version, including a control panel to control external pump. All models are supplied with stainless steel valves, bottle height adjustable supports, level marker, provision for filter installation (only on models in the high version). On request it is possible to equip the machine with filling pump (model ENOS 20 in stainless steel/EURO 20 with rubber impeller), and filter boxes of 20×20 steel frame.

• Available nitrogen saturation valve inside the bottle before filling. Easy to use, only requires connection with a nitrogen container. Adaptable on any container.

This Enoitalia gravity filler is completely made in stainless steel AISI 304, suitable for filling alimentary liquid  such as wine, olive oil, beer. It is equipped with heads fully adjustable and removable for fast and thorough cleaning. On the demand the filling heads are available for bottle opening diameter 60mm, and height level 120mm. The machine is available in both desk version bench with 4 adjustable feet, either in trolley version with four wheels to make bottling easier.

Level sensor available in mechanical version, made entirely in stainless steel, both in the electronic version, including a control panel to control external pump. All models are supplied with stainless steel valves, bottle height adjustable supports, level marker, provision for filter installation (only on models in the high version). On request it is possible to equip the machine with filling pump (model Enos 20 in stainless steel/EURO 20 with rubber impeller), and filter boxes of 20×20 steel frame.

• Available nitrogen saturation valve inside the bottle before filling. Easy to use, only requires connection with a nitrogen container. Adaptable on any container.

GRAVITY FILLING R6A

Gravity filling completely made in stainless steel AISI 304, suitable for filling alimentary liquid  such as wine, olive oil, beer. It is equipped with heads fully adjustable and removable for fast and thorough cleaning. On the demand the filling heads are available for bottle opening diameter 60mm and height level 120mm. The machine is available in trolley version with four wheels to make bottling easier.

Level sensor available in mechanical version, made entirely in stainless steel, both in the electronic version, including a control panel to control external pump. All models are supplied with stainless steel valves, bottle height adjustable supports, level marker, provision for filter installation (only on models in the high version). On request it is possible to equip the machine with filling pump (model Enos 20 in stainless steel/ EURO 20 with rubber impeller) and filter boxes of 20×20 steel frame.

• Available nitrogen saturation valve inside the bottle before filling. Easy to use, only requires connection with a nitrogen container. Adaptable on any container.

Semi-automatic Isobaric Filler

This filling machine is suitable for the filling of sparkling wines, champagne, gassed drinks, beer and mineral water. It fills at high pressure and it is equipped with special system and devices to avoid foams. It is possible to fill glass bottles from 200 cc up to 2 litres, and PET bottles with the apposite optionals. The operations of loading and unloading of the bottles are manually performed by the operator, while all the filling phases are automatic.

The machine con be equipped with pre-evacuation plant, constituted by a vacuum pump with liquid ring, that allows to remove the air from the bottles before the filling, operation that is particularly recommended for that products that can suffer alterations due to the oxidation or to the possible presence of polluting agents in the air contained in the bottles to fill.

This piece of bottling machinery is supplied with an inverter in order to follow the variation of the hourly production in comparison with the size of the bottle and the work pressure. The central feeding group and all the parts are made in stainless steel AISI 304,