Our Pumps
Kiesel Pumps
Over the past 40 years, eccentric screw pumps have become the most used displacement pumps in the beverage industry.
The simple handling, nearly pulsation-free controllable stream, its self-priming capabilities and the application possibilities for promoting liquid, non-homogeneous and high-viscose products have justified the triumphant progression of these kinds of pumps.
For the beverage industry Kiesel provide pumps in series M, B, FT, FTF and TP.
Please Click here to view our range of Kiesel pumps
Enoitalia Pumps
Enoitalia’s range of Centrifugal pumps with impeller and body in stainless steel AISI 304 have been very reliable pumps at a reasonable price. They are particularly suited for use with alimentary liquid (wine, milk, oil, juice, beer) and hot liquid (beer).
Equipped with mechanical seal and reverse rotation, allows the transfer of liquids free of suspended solids. The particular technology used allows a suction also in the presence of discontinuous liquid.
The Enoitalia range of Volumetric pumps in stainless steel AISI 304 with rubber impeller, applied directly to the electric motor, and seal chamber separate by the motor flange. All pumps are available without switch or with inverter.
Single-phase models are supplied with an electric motor on board and start capacitor to ensure trouble-free operation at the start and in the change of direction.
On three phase models the control panel is available standard on board of the motor, or with a CE type, with timer, dry-stop, 24V output, remote control.
Please Click here to view our range of enoitalia pumps
MASH PUMP
Mash pump available in 6000 – 15000 kg/hr.
- Loading hooper with auger
- Hinged stainless discharge cone
- Control panel with emergency stop
- Gamma 80 available in single phase with speed reducer HP 2,5
- Gamma 180 three phase with speed reducer HP 5,5
EBARA JES M5 CENTRIFUGAL PUMP
The electric pumps of the JES – JE series are electric pumps in AISI 304 stainless steel. These are self-priming pumps equipped with Venturi group (ejector and diffuser), which are easy to use and light thanks to their small size. Constructively they have the pump body, the support, the seal bearing disc in AISI 304 steel.
They are equipped with an AISI 303 shaft (for the part in contact with the liquid).
The impellers are different depending on the model: for the JES electric pumps the impeller is in
PPO + PS reinforced with glass fibres, while for the JE the impeller is in AISI 304. For both versions the mechanical seal is in Ceramic/Carbon/NBR. The motors are 2-pole, closed, asynchronous, self ventilated with internal ventilation. High energy efficiency IE3 starting from 0.75 kW.
PUMP TECHNICAL DATA
• Total head from 11.5 to 49 m
• Capacity from 0.3 to 4.5 m3/h
• Maximum operating pressure 6 bar
• Maximum liquid temperature 45°C
• Maximum working width 8 m
EBARA CDX 120/07 CENTRIFUGAL PUMP
Ebara CDX single impeller, centrifugal pump with hydraulic components made from AISI 304 stainless steel.
Ebara CDX pumps are suitable for pressure boosting, water supply, treatment & irrigation, air conditioning systems and general water pumping including moderately aggressive liquids.
