fbpx

Maurer

Brochures

Washers     Pasteurisers       Mobile Equipment     Millers     Fillers     Beltpresses


 

 

MKSP 300 belt press

MKSP 300 belt press is designed for extracting juice from apple and other vegetables such as ginger and carrot. The equipment is fully automated: the apples are fed into the gullet and the pressed apple juice flows through the outlet located in the lower section, on the side. A rotating brush and high pressure washer cleans the machine. The waste water leaves via an outlet also located in the lower section, on the side.

  • New development
  • Stepless belt speed adjustment
  • User friendly
  • High performance (75%) juice yield (depending on the species of fruits)
  • Fully automated

Fully automatic operation, with closed work area, reduces the oxidation to the minimum. In the bottom of the machine, there are two spinning washer heads guarantees optimal cleaning during the process. The distance between the press cylinder and the juice collector tray reduced against foaming. Very easy to clean.

With 4pcs vibration-free feet. Requires minimal maintenance. High-pressure washer and air compressor are essential for operating.

Technical data

Up to 300kg of apple pulp per hour

0,75 kW, 400 V, 6 A, triphase

170 kg

1250x1370x1520 mm

Specifications

  • Electric demands: 0,75 kW, 400 V, 6 A, triphase
  • Material: WNr. 1.4301, AISI 304 stainless steel
  • Dimensions: 1250x1370x1520 mm
  • Weight: 170 kg
  • IP65 certified electronics
  • Food industrial, massive polyester belt
  • Belt: 2mm thick, density: 6×16 filament/cm^2, ½ rate (suitable for large fiber-free juice)
  • High yield: 75% – depends on the freshness and quality of the fruits
  • High-pressure washer demand: 500 L/h
  • Compressed air demand: 50 L/h 6 bar
  • Built-in inverter: steplessly adjustable belt speed

 

MKSP 600 belt press

MKSP 600 belt press is designed for extracting juice from apples and other vegetables such as ginger and carrot. The equipment is fully automated: the apples are fed into the gullet and the pressed apple juice flows through the outlet located in the lower section, on the side. A rotating brush and high pressure washer cleans the machine. The waste water leaves via an outlet also located in the lower section, on the side.

  • New development
  • Stepless belt speed adjustment
  • User friendly
  • High performance (75%) juice yield (depending on the species of fruits)
  • Fully automated

Fully automatic operation, with closed work area, reduces the oxidation to the minimum. In the bottom of the machine, there are two spinning washer heads guarantees optimal cleaning during the process. The distance between the press cylinder and the juice collector tray reduced against foaming. Very easy to clean.

With 4pcs vibration-free feet. Requires minimal maintenance. High-pressure washer and air compressor are essential for operating. Contact us if you are interested in this piece of cider making equipment.

Technical data

Up to 600 kg of apple pulp per hour

1 kW, 400 V, 6 A, triphase

480 kg

2100x1250x1250 mm

Specifications

  • Electric demands: 1 kW, 400 V, 6 A, triphase
  • Material: WNr. 1.4301, AISI 304 stainless steel
  • Dimensions: 2100x1250x1250 mm
  • Input height: 1250 mm
  • Output height: 370 mm
  • Weight: 480 kg
  • IP65 certified electronics
  • Food industrial, massive polyester belt
  • Belt: 2mm thick, density: 6×16 filament/cm^2, ½ rate (suitable for large fiber-free juice)
  • High yield: 75% – depends on the freshness and quality of the fruits
  • High-pressure washer demand: 500 L/h
  • Compressed air demand: 50 L/h 6 bar
  • Built-in inverter: stepless adjustable belt speed

See the full specification for this piece of cider making equipment.


 

MKSP 900 belt press

MKSP 900 belt press is designed for extracting juice from apples and other vegetables such as ginger and carrot. The equipment is fully automated: the apples are fed into the gullet and the pressed apple juice flows through the outlet located in the lower section, on the side. A rotating brush and high pressure washer cleans the machine. The waste water leaves via an outlet also located in the lower section, on the side.

  • New development
  • Stepless belt speed adjustment
  • User friendly
  • High performance (75%) juice yield (depending on the species of fruits)
  • Fully automated

Fully automatic operation, with closed work area, reduces the oxidation to the minimum. In the bottom of the machine, there are two spinning washer heads guarantees optimal cleaning during the process. The distance between the press cylinder and the juice collector tray reduced against foaming. Very easy to clean.

With 4pcs vibration-free feet. Requires minimal maintenance. High-pressure washer and air compressor are essential for operating this piece of cider making equipment.

Technical data

UP to 900 kg of apple pulp per hour

1 kW, 400 V, 6 A, triphase

480 kg

2100x1250x1250 mm

Specifications

  • Electric demands: 1 kW, 400 V, 6 A, triphase
  • Material: WNr. 1.4301, AISI 304 stainless steel
  • Dimensions: 2100x1250x1250 mm
  • Input height: 1250 mm
  • Output height: 370 mm
  • Weight: 480 kg
  • IP65 certified electronics
  • Food industrial, massive polyester belt
  • Belt: 2mm thick, density: 6×16 filament/cm^2, ½ rate (suitable for large fiber-free juice)
  • High yield: 75% – depends on the freshness and quality of the fruits
  • High-pressure washer demand: 500 L/h
  • Compressed air demand: 50 L/h 6 bar
  • Built-in inverter: stepless adjustable belt speed

 

MKSP 1400 belt press

MKSP 1400 belt press is designed for extracting juice from apple and other vegetables such as ginger and carrot. The equipment is fully automated: the apples are fed into the gullet and the pressed apple juice flows through the outlet located in the lower section, on the side. A rotating brush and high pressure washer cleans the machine. The waste water leaves via an outlet also located in the lower section, on the side.

  • New development
  • Stepless belt speed adjustment
  • User friendly
  • High performance (75%) juice yield (depending on the species of fruits)
  • Fully automated

Fully automatic operation, with closed work area, reduces the oxidation to the minimum. In the bottom of the machine, there are two spinning washer heads guarantees optimal cleaning during the process. The distance between the press cylinder and the juice collector tray reduced against foaming. Very easy to clean.

With 4pcs vibration-free feet. Requires minimal maintenance. High-pressure washer and air compressor are essential for operating.

Technical data

Up to 1400 kg of apple pulp per hour

3 kW, 400 V, 6 A, triphase

1150 kg

2700x1550x1250 mm

Specifications

  • Electric demands: 3 kW, 400 V, 6 A, triphase
  • Material: WNr. 1.4301, AISI 304 stainless steel
  • Dimensions: 2700x1550x1250 mm
  • Input height: 1250 mm
  • Output height: 370 mm
  • Weight: 1150 kg
  • IP65 certified electronics
  • Food industrial, massive polyester belt
  • Belt: 2mm thick, density: 6×16 filament/cm^2, ½ rate (suitable for large fiber-free juice)
  • High yield: 75% – depends on the freshness and quality of the fruits
  • High-pressure washer demand: 500 L/h
  • Compressed air demand: 50 L/h 6 bar
  • Built-in inverter: steplessly adjustable belt speed

 

MKT 100 juice container

MKT 100 is a useful and necessary accessory for belt presses. The juice flowing out of the belt press collects in to the juice container and delivers to puffer tanks.

  • Storage capacity 100 L
  • Juice pump and level sensor
  • Juice filter
  • Manual and automatic juice outflow

Technical data

2000 l/h

0,5 kW, 230 V, 6 A, monophase

50 kg

550x1075x350 mm

Specifications

  • Performance: 2000 L/h
  • Electric demands: 0,5 kW, 230 V, 6 A, monophase
  • Material: WNr. 1.4301, AISI 304 stainless steel
  • Dimensions: 550x1075x350 mm
  • Weight: 50 kg
  • IP65 certified electronics
  • Food industrial impeller pump
  • Juice level sensors

 

FRUIT MILL – MKD 5000

This fruit mill is made out of 1.4301 stainless steel

  • easy to clean
  • 5000 kg/hr
  • 5.5kW
  • robust
  • 3 phase ONLY.

 

FRUIT MILL – MKDL 1000

This fruit mill is made out 1.4301 stainless steel

  • easy to clean
  • 120 litre barrel
  • 1000 kg/hr
  • 2.2kW
  • robust
  • Available in both single and three phase.

 

FRUIT MILL – MKD 1000

This fruit mill is made out of 1.4301 stainless steel

  • easy to clean
  • 1000 kg/hr
  • 2.2kW
  • robust
  • Available in both single and three phase

 

STRAINING BAG

Made to measure.

Price per running metre.


 

MKM 1000/3000 fruit & vegetable washer

This machine is suitable for washing fruits and vegetables. The poured fruit falls directly into the water, then the elevator conveyor pulls out from the water, where clean it with high pressure water (in MKMDC and MKMDK models are grinding too) and  pass on to the next workstation. The fruits get a clean water wash on the conveyor. The machine is suitable for processing lines due to the adjustable speed of the elevator.

  • fruit and vegetable washing and transporting at the same time
  • efficient washing with high pressure nozzles
  • mobile unit
  • adjustable belt speed
  • The machine is compatible with the following

The fruits go to the input hopper, after soaking the elevator towards the fruit under the secondary clearwater sprays.

Easy to clean, with massive polypropylene/acetal modular elevator, steplessly adjustable speed in both ways, with 2pcs rotating, 2pcs fix wheels. Requires minimal maintenance.

Technical data

1000/3000 kg/h

0,55 kW, 230 V, 6 A, mono phase /
0,75 kW, 400 V, 16 A, 3 phase

110/135 kg

600x1600x1550 mm – output height: 1160 mm/
710x2925x2120 mm – output height: 1830 mm

Specifications

  • Performance: 1000/3000 kg/h
  • Electric demands: 0,55/0,75 kW, 230 V, 6 A, monophase
  • Material: WNr. 1.4301, AISI 304 stainless steel
  • Dimensions: 600x1600x1550 mm/710x2925x2120 mm
  • Output height: 1160/1830 mm
  • Weight: 80 kg
  • Tub water capacity: 80/120 L/shift
  • Washing water supply: (20-100L/h depending on the setting)
  • Water connection: 3/4“ quick connector
  • IP65 certified electronics

 

MKMD(C) 3000 fruit & veg washer with grinder

This machine is suitable for washing and grinding fruits and vegetables. The poured fruit falls directly into the water, then the elevator conveyor pulls the product out from the water, where its is cleaned with high pressure water (in MKMDC and MKMDK models are grinded too) and  passed on to the next workstation. The fruits get a clean water wash on the conveyor. The machine is suitable for processing lines due to the adjustable speed of the elevator.

  • Fruit and vegetable washing, transporting and grinding at the same time
  • Efficient washing with high pressure nozzles
  • Mobile unit
  • Adjustable belt speed
  • The machine is compatible with the following

Easy to clean, with massive polypropylene/acetal modular elevator, steplessly adjustable speed in both ways, with 2pcs rotating, 2pcs fix wheels or vibration-free feet. Requires minimal maintenance.

Available options:

  • Changeable diameter sieve for changing the texture of the mash
  • Stop ‘n’ Go system membrane sensor, that allows the fruit washer/grinder and the beltpress work together
  • Dosing module sliding door with end-switch, that allows the dosing from the grinder safely to the packpress.

Technical data

1000-2000 kg/óra

3 kW, 400 V, 16 A, három fázis

200 kg

710x3200x2120mm

 

Specifications

  • Performance: 1-2000 kg/h
  • Electric demands: 3 kW, 400 V, 16 A, triphase
  • Material: WNr. 1.4301, AISI 304 stainless steel
  • Dimensions: 710x3200x2120 mm
  • Output height: 1280 mm
  • Weight: 200 kg
  • Tub water capacity: 120 L/shift
  • Washing water supply: (20-100L/h depending on the setting)
  • Water connection: 3/4“ quick connector
  • IP65 certified electronics
  • Grinder with a massive crushing hammer (available for beetroot and quince)
  • Noise emission 60-70 dB

 

MDK 1500/3000 fruit & vegetable washer with grinder & brush

This machine is suitable for washing and grinding fruits and vegetables. The poured fruit falls directly into the water, then the elevator conveyor pulls the product out from the water, where it is cleaned with high pressure water (in MKMDC and MKMDK models are grinding too) and  pass on to the next workstation. The fruits get a clean water wash on the conveyor. The machine is suitable for processing lines due to the adjustable speed of the elevator.

  • Fruit and vegetable washing, transporting and grinding at the same time
  • Efficient washing with high pressure nozzles
  • Mobile unit
  • Adjustable belt speed
  • The machine is compatible with the following

 

Easy to clean, with massive polypropylene/acetal modular elevator, steplessly adjustable speed in both ways, with 2pcs rotating, 2pcs fix wheels or vibration-free feet. Requires minimal maintenance.

Available options:

    • Changeable diameter sieve: for changing the texture of the mash
    • Stop ‘n’ Go system:  membrane sensor, that allows the fruit washer/grinder and the beltpress work together
    • Dosing module: sliding door with end-switch, that allows the dosing from the grinder safely to the packpress.

Technical data

1500-2000 kg/h /
3000 kg/h

4 kW, 400 V, 16 A, 3 phase /
5 kW, 400 V, 16 A, 3 phase

275/360 kg

1000x3030x2120mm / output height: 1270 mm
1000x3600x2120mm / output height: 1270 mm

Specifications

  • Performance: 1500-2000/3000 kg/h
  • Electric demands: 4 / 5 kW, 400 V, 16 A, triphase
  • Material: WNr. 1.4301, AISI 304 stainless steel
  • Dimensions: 1000x3030x2120 mm / 1000x3600x2120 mm
  • Output height: 1270 mm
  • Weight: 275/360 kg
  • Tub water capacity: 130/180 L/shift
  • Washing water supply: (20-100L/h depending on the setting)
  • Water connection: 3/4“ quick connector
  • IP65 certified electronics
  • Grinder with a massive crushing hammer (available for beetroot and quince)
  • The grinder can be by-passed and turned, this way the machine is capable of process stone-fruits.
  • Noise emission: 60-70 dB
  • 4 pcs of strong, counter-rotating brushes for the intense cleaning

 

BELT PRESS 1000KG/HR

  • 1.4301 Stainless steel Belt Press
  • 1000 kg/hr
  • 1kw
  • 6 bar working pressure
  • 70-80% yield depending on the quality of the fruit
  • Dimension of the belt press: Width 1300mm x Height 1450mm x Length 2100mm
  • Three phase
Facebook Feed

Facebook Feed

Vitikit Limited

Vitikit Limited is proud to be partnered with a variety of manufacturers from around the globe. We are a leading European distributor for major equipment manufacturers in countries including Germany, China and Brazil. From grape processing machinery to crossflow filtration equipment to bottling machinery, we provide it all and everything in between. Our website is home to a vast range of cider, distilling, beer and wine making equipment. Get in touch directly if you see a certain type of equipment and we will source it.
Vitikit Limited
Vitikit Limited
It's beginning to look a lot like Christmas! 🎄

We'd like to make our customers aware of our upcoming Christmas opening times, so do get touch with our team before the below dates to ensure you have everything you need for a perfect festive period with friends and family:

We close on December 23rd until Tuesday 4th January 2022.

We hope you have a wonderful time preparing in the run up to the big day - don't hesitate to contact us if you require assistance before then!
Vitikit Limited
Vitikit Limited
Our latest GIVEAWAY is LIVE - You can enter our instagram competition for the chance to win beer from Loddon Brewery this Christmas.

https://www.instagram.com/p/CWnt1jaonr9/
Vitikit Limited
Vitikit Limited
Our partners NDL Craft in China have invested in their new state of the art factory. It covers an area 50,000 m². It contains workshops, offices and dinning facilities for the works. This enables NDL to keep a competitive edge and produce high quality stainless steel vessels. Check out the products at https://www.v-brew.co.uk/

☎️ (+44) 01395 233031
📧 info@vitikit.com

#brewing #fermentation #investment #beer #distilling
Vitikit Limited
Vitikit Limited
At the very heart of all our customers products is the ability to maintain the exacting conditions time and time again. Our in house engineering team has developed a temperature control system for exact temperature control. Features include:

- Touch screen interface
- Automated control
- Scaled and customised to users needs
- Energy Efficient

📞 (+44) 01395 233031
✉️ info@vitikit.com

#beer #wine #cider #brewers #vineyards #orchards #tempcontroller
Vitikit Limited
Vitikit Limited
Our colleague Kieran has been busy again this week installing a brew house system at Gun Brewery in Sussex. You can check out the full range online at our brewing website V-BREW.CO.UK

#brewery #brewers #brewing #breweryinstallations #beer
Vitikit Limited
Vitikit Limited
Did you know Vitikit can now delivery locally! 📦🚚

Out the door this week was our 5000L variable capacity Algor tank. Viti-delivery can make deliveries across the South West.

Enquire now:
📞 (+44) 01395 233031
✉️ info@vitikit.com

#delivery #wine #cider #fermentation #vineyards #orchards
Twitter Feed

Twitter Feed

Our latest GIVEAWAY is LIVE - You can enter our instagram competition for the chance to win beer from Loddon Brewery this Christmas.

https://t.co/K3JWeMHtHj https://t.co/8pA9tjPWL8
Vitikit photo