Maurer

MKSP 300 belt press

MKSP 300 pressing belt is designed for extracting juice from fruits. The equipment is fully automated: the fruit is fed into the gullet and the fruit juice flows through the outlet located at the lower part, on the side. A rotating brush and high pressure washer cleans the machine. The waste water leaves via an outlet also located at the lower part, on the side.

  • new development
  • stepless belt speed adjustment
  • user friendly
  • high performance (75%) juice yield (depending on the species of fruits)
  • fully automated

Fully automatic operation, with closed work area, reduces the oxidation to the minimum. In the bottom of the machine, there are two spinning washer heads guarantees optimal cleaning during the process. The distance between the press cylinder and the juice collector tray reduced against foaming. Very easy to clean.

With 4pcs vibration-free feet. Requires minimal maintenance. High-pressure washer and air compressor are essential for operating.

Technical data

300 kg/h

0,75 kW, 400 V, 6 A, triphase

170 kg

1250x1370x1520 mm

Specifications

  • Performance: 300 kg/h
  • Electric demands: 0,75 kW, 400 V, 6 A, triphase
  • Material: WNr. 1.4301, AISI 304 stainless steel
  • Dimensions: 1250x1370x1520 mm
  • Weight: 170 kg
  • IP65 certified electronics
  • Food industrial, massive polyester belt
  • Belt: 2mm thick, density: 6×16 filament/cm^2, ½ rate (suitable for large fiber-free juice)
  • High yield: 75% – depends on the freshness and quality of the fruits
  • High-pressure washer demand: 500 L/h
  • Compressed air demand: 50 L/h 6 bar
  • Built-in inverter: steplessly adjustable belt speed

 

MKSP 600 belt press

MKSP 600 pressing belt is designed for extracting juice from fruits. The equipment is fully automated: the fruit is fed into the gullet and the fruit juice flows through the outlet located at the lower part, on the side. A rotating brush and high pressure washer cleans the machine. The waste water leaves via an outlet also located at the lower part, on the side.

  • new development
  • stepless belt speed adjustment
  • user friendly
  • high performance (75%) juice yield (depending on the species of fruits)
  • fully automated

Fully automatic operation, with closed work area, reduces the oxidation to the minimum. In the bottom of the machine, there are two spinning washer heads guarantees optimal cleaning during the process. The distance between the press cylinder and the juice collector tray reduced against foaming. Very easy to clean.

With 4pcs vibration-free feet. Requires minimal maintenance. High-pressure washer and air compressor are essential for operating.

Technical data

600 kg/h

1 kW, 400 V, 6 A, triphase

480 kg

2100x1250x1250 mm

Specifications

  • Performance: 600 kg/h
  • Electric demands: 1 kW, 400 V, 6 A, triphase
  • Material: WNr. 1.4301, AISI 304 stainless steel
  • Dimensions: 2100x1250x1250 mm
  • Input height: 1250 mm
  • Output height: 370 mm
  • Weight: 480 kg
  • IP65 certified electronics
  • Food industrial, massive polyester belt
  • Belt: 2mm thick, density: 6×16 filament/cm^2, ½ rate (suitable for large fiber-free juice)
  • High yield: 75% – depends on the freshness and quality of the fruits
  • High-pressure washer demand: 500 L/h
  • Compressed air demand: 50 L/h 6 bar
  • Built-in inverter: steplessly adjustable belt speed

 

MKSP 900 belt press

MKSP 900 pressing belt is designed for extracting juice from fruits. The equipment is fully automated: the fruit is fed into the gullet and the fruit juice flows through the outlet located at the lower part, on the side. A rotating brush and high pressure washer cleans the machine. The waste water leaves via an outlet also located at the lower part, on the side.

  • new development
  • stepless belt speed adjustment
  • user friendly
  • high performance (75%) juice yield (depending on the species of fruits)
  • fully automated

Fully automatic operation, with closed work area, reduces the oxidation to the minimum. In the bottom of the machine, there are two spinning washer heads guarantees optimal cleaning during the process. The distance between the press cylinder and the juice collector tray reduced against foaming. Very easy to clean.

With 4pcs vibration-free feet. Requires minimal maintenance. High-pressure washer and air compressor are essential for operating.

Technical data

900 kg/h

1 kW, 400 V, 6 A, triphase

480 kg

2100x1250x1250 mm

Specifications

  • Performance: 900 kg/h
  • Electric demands: 1 kW, 400 V, 6 A, triphase
  • Material: WNr. 1.4301, AISI 304 stainless steel
  • Dimensions: 2100x1250x1250 mm
  • Input height: 1250 mm
  • Output height: 370 mm
  • Weight: 480 kg
  • IP65 certified electronics
  • Food industrial, massive polyester belt
  • Belt: 2mm thick, density: 6×16 filament/cm^2, ½ rate (suitable for large fiber-free juice)
  • High yield: 75% – depends on the freshness and quality of the fruits
  • High-pressure washer demand: 500 L/h
  • Compressed air demand: 50 L/h 6 bar
  • Built-in inverter: steplessly adjustable belt speed

 

MKSP 1400 belt press

MKSP 1400 pressing belt is designed for extracting juice from fruits. The equipment is fully automated: the fruit is fed into the gullet and the fruit juice flows through the outlet located at the lower part, on the side. A rotating brush and high pressure washer cleans the machine. The waste water leaves via an outlet also located at the lower part, on the side.

  • new development
  • stepless belt speed adjustment
  • user friendly
  • high performance (75%) juice yield (depending on the species of fruits)
  • fully automated

Fully automatic operation, with closed work area, reduces the oxidation to the minimum. In the bottom of the machine, there are two spinning washer heads guarantees optimal cleaning during the process. The distance between the press cylinder and the juice collector tray reduced against foaming. Very easy to clean.

With 4pcs vibration-free feet. Requires minimal maintenance. High-pressure washer and air compressor are essential for operating.

Technical data

1400 kg/h

3 kW, 400 V, 6 A, triphase

1150 kg

2700x1550x1250 mm

Specifications

  • Performance: 1400 kg/h
  • Electric demands: 3 kW, 400 V, 6 A, triphase
  • Material: WNr. 1.4301, AISI 304 stainless steel
  • Dimensions: 2700x1550x1250 mm
  • Input height: 1250 mm
  • Output height: 370 mm
  • Weight: 1150 kg
  • IP65 certified electronics
  • Food industrial, massive polyester belt
  • Belt: 2mm thick, density: 6×16 filament/cm^2, ½ rate (suitable for large fiber-free juice)
  • High yield: 75% – depends on the freshness and quality of the fruits
  • High-pressure washer demand: 500 L/h
  • Compressed air demand: 50 L/h 6 bar
  • Built-in inverter: steplessly adjustable belt speed

 

MKT 100 juice container

MKT 100 is a useful and necessary accessory for belt presses. The juice flowing out of the belt press collects in to the juice container and delivers to puffer tanks.

  • storeing capacity 100 L
  • with juice pump and level sensor
  • with juice filter
  • manual and automatic juice outflow

Technical data

2000 l/h

0,5 kW, 230 V, 6 A, monophase

50 kg

550x1075x350 mm

Specifications

  • Performance: 2000 L/h
  • Electric demands: 0,5 kW, 230 V, 6 A, monophase
  • Material: WNr. 1.4301, AISI 304 stainless steel
  • Dimensions: 550x1075x350 mm
  • Weight: 50 kg
  • IP65 certified electronics
  • Food industrial impeller pump
  • Juice level sensors

 

FRUIT MILL – MKD 5000

This fruit mill is made out of 1.4301 stainless steel

  • easy to clean
  • 5000 kg/hr
  • 5.5kW
  • robust
  • 3 phase ONLY.

 

FRUIT MILL – MKDL 1000

This fruit mill is made out 1.4301 stainless steel

  • easy to clean
  • 120 litre barrel
  • 1000 kg/hr
  • 2.2kW
  • robust
  • Available in both single and three phase.

 

FRUIT MILL – MKD 1000

This fruit mill is made out of 1.4301 stainless steel

  • easy to clean
  • 1000 kg/hr
  • 2.2kW
  • robust
  • Available in both single and three phase

 

STRAINING BAG

Made to measure

Price per running metre


 

MKM 1000/3000 fruit and vegetable washer

This machine is suitable for washing fruits and vegetables. The poured fruit falls directly into the water, then the elevator conveyor pulls out from the water, where clean it with high pressure water (in MKMDC and MKMDK models are grinding too) and  pass on to the next workstation. The fruits get a clean water wash on the conveyor. The machine is suitable for processing lines due to the adjustable speed of the elevator.

  • fruit and vegetable washing and transporting at the same time
  • efficient washing with high pressure nozzles
  • mobile unit
  • adjustable belt speed
  • The machine is compatible with the following

The fruits go to the input hopper, after soaking the elevator towards the fruit under the secondary clearwater sprays.

Easy to clean, with massive polypropylene/acetal modular elevator, steplessly adjustable speed in both ways, with 2pcs rotating, 2pcs fix wheels. Requires minimal maintenance.

Technical data

1000/3000 kg/h

0,55 kW, 230 V, 6 A, mono phase /
0,75 kW, 400 V, 16 A, 3 phase

110/135 kg

600x1600x1550 mm – output height: 1160 mm/
710x2925x2120 mm – output height: 1830 mm

Specifications

  • Performance: 1000/3000 kg/h
  • Electric demands: 0,55/0,75 kW, 230 V, 6 A, monophase
  • Material: WNr. 1.4301, AISI 304 stainless steel
  • Dimensions: 600x1600x1550 mm/710x2925x2120 mm
  • Output height: 1160/1830 mm
  • Weight: 80 kg
  • Tub water capacity: 80/120 L/shift
  • Washing water supply: (20-100L/h depending on the setting)
  • Water connection: 3/4“ quick connector
  • IP65 certified electronics

 

MKMD(C) 3000 fruit and vegetable washer with (compact) grinder

This machine is suitable for washing and grinding fruits and vegetables. The poured fruit falls directly into the water, then the elevator conveyor pulls out from the water, where clean it with high pressure water (in MKMDC and MKMDK models are grinding too) and  pass on to the next workstation. The fruits get a clean water wash on the conveyor. The machine is suitable for processing lines due to the adjustable speed of the elevator.

  • fruit and vegetable washing, transporting and grinding at the same time
  • efficient washing with high pressure nozzles
  • mobile unit
  • adjustable belt speed
  • The machine is compatible with the following

The fruits go to the input hopper, after soaking the elevator towards the fruit under the secondary clearwater sprays.

Easy to clean, with massive polypropylene/acetal modular elevator, steplessly adjustable speed in both ways, with 2pcs rotating, 2pcs fix wheels or vibration-free feet. Requires minimal maintenance.

Available options:

  • Changeable diameter sieve for changing the texture of the mash
  • Stop ‘n’ Go system membrane sensor, that allows the fruit washer/grinder and the beltpress work together
  • Dosing module sliding door with end-switch, that allows the dosing from the grinder safely to the packpress.

Technical data

1000-2000 kg/óra

3 kW, 400 V, 16 A, három fázis

200 kg

710x3200x2120mm

Specifications

  • Performance: 1-2000 kg/h
  • Electric demands: 3 kW, 400 V, 16 A, triphase
  • Material: WNr. 1.4301, AISI 304 stainless steel
  • Dimensions: 710x3200x2120 mm
  • Output height: 1280 mm
  • Weight: 200 kg
  • Tub water capacity: 120 L/shift
  • Washing water supply: (20-100L/h depending on the setting)
  • Water connection: 3/4“ quick connector
  • IP65 certified electronics
  • Grinder with a massive crushing hammer (available for beetroot and quince)
  • Noise emission 60-70 dB

 

MDK 1500/3000 fruit and vegetable washer with grinder and brush


 

This machine is suitable for washing and grinding fruits and vegetables. The poured fruit falls directly into the water, then the elevator conveyor pulls out from the water, where clean it with high pressure water (in MKMDC and MKMDK models are grinding too) and  pass on to the next workstation. The fruits get a clean water wash on the conveyor. The machine is suitable for processing lines due to the adjustable speed of the elevator.

  • fruit and vegetable washing, transporting and grinding at the same time
  • efficient washing with high pressure nozzles
  • mobile unit
  • adjustable belt speed
  • The machine is compatible with the following

The fruits go to the input hopper, after soaking the elevator towards the fruit under the secondary clearwater sprays.

Easy to clean, with massive polypropylene/acetal modular elevator, steplessly adjustable speed in both ways, with 2pcs rotating, 2pcs fix wheels or vibration-free feet. Requires minimal maintenance.

Available options:

    • Changeable diameter sieve: for changing the texture of the mash
    • Stop ‘n’ Go system:  membrane sensor, that allows the fruit washer/grinder and the beltpress work together
    • Dosing module: sliding door with end-switch, that allows the dosing from the grinder safely to the packpress.

Technical data

1500-2000 kg/h /
3000 kg/h

4 kW, 400 V, 16 A, 3 phase /
5 kW, 400 V, 16 A, 3 phase

275/360 kg

1000x3030x2120mm / output height: 1270 mm
1000x3600x2120mm / output height: 1270 mm

Specifications

  • Performance: 1500-2000/3000 kg/h
  • Electric demands: 4 / 5 kW, 400 V, 16 A, triphase
  • Material: WNr. 1.4301, AISI 304 stainless steel
  • Dimensions: 1000x3030x2120 mm / 1000x3600x2120 mm
  • Output height: 1270 mm
  • Weight: 275/360 kg
  • Tub water capacity: 130/180 L/shift
  • Washing water supply: (20-100L/h depending on the setting)
  • Water connection: 3/4“ quick connector
  • IP65 certified electronics
  • Grinder with a massive crushing hammer (available for beetroot and quince)
  • The grinder can be by-passed and turned, this way the machine is capable of process stone-fruits.
  • Noise emission: 60-70 dB
  • 4 pcs of strong, counter-rotating brushes for the intense cleaning
Facebook Feed

Facebook Feed

Vitikit Limited
Vitikit Limited
Learn more about one of the Pulpt Ciders included as part of our prize in December's giveaway. Featured is The Level.

Refer to our previous post for details on how to enter. Winner announced December 17th!

Visit Pulpt's website for more - https://www.pulpt.co.uk/

#Pulpt #Vitikit #Cider #VitikitGiveaway #CiderMakers
Twitter Feed

Twitter Feed


Learn more about one of the Pulpt Ciders included as part of our prize in December's giveaway. Featured is The Level.

Refer to our previous post for details on how to enter.

Visit Pulpt's website - https://t.co/Ry2s93TU2P

#Pulpt #Vitikit #Cider #VitikitGiveaway #CiderMakers https://t.co/3t4ypUvkeM
Vitikit photo